3 Troubleshooting Tips for Your TV Antenna Service

0
41
TV Antenna

Is your TV antenna struggling to pick up a clear signal? Are you frustrated and don’t know how to fix it?

Not being able to pick up TV channels is very frustrating. After a long hard day at work, you come home and are unable to watch your favorite shows. You then have to watch old DVDs while wasting money on channel subscriptions.

Luckily, there are some simple things you can do to fix your antenna and start enjoying your shows again.

In this article, we’re going to share 3 tips on how to fix your TV antenna service.

1. No Clear Line of Sight to the Broadcasting Tower

If you live in an area with tall buildings or even mountains nearby, then these obstacles may be blocking the signal to your antenna.

If you think this may be the problem, you should place the antenna in a higher location, or alternatively, use a higher mast. This should hopefully increase your signal reception.

If you need to do this, then please be careful and get somebody to help you. The best option may even be to hire a professional so you don’t have to worry about injuring yourself.

2. You’re Too Far From the Broadcasting Tower

This is something most people don’t think about, and you’re not likely to check it before buying a house. However, some homes are actually too far from broadcasting towers to receive a strong signal. This usually happens when you’re around 70 miles plus from a tower.

But don’t panic, as you can still fix this.

Certain websites can tell you how far you are from a broadcasting tower by entering your address. If you’re over 70 miles, you’ll need some special equipment to help receive a signal. You should consult with a professional who will be able to help and advise.

3. Loose Cables

The problem may not be due to the antenna or external factors at all. Loose or damaged cables can stop you from receiving a quality picture on your television.

It’s important to check for loose cables or any type of corrosion, etc. If they’re damaged, then replace them immediately, as they can be a fire hazard.

If you can’t see anything wrong with the cables, then check to see if you’re using a splitter. If you are, then disconnect it and plug the cable directly into the TV and run a channel scan. If the signal improves, then using a distribution amplifier should fix it.

Finally, if you’re in Sydney and are struggling to receive a digital TV signal, then read more now for help.

Know How to Fix Your TV Antenna Service

We hope you have enjoyed our article on fixing your TV antenna service.

As you can see, there are many reasons why you may not be able to pick up a clear signal. However, there are also many things you can do to fix it and be able to enjoy watching television again.

Check out the rest of our blog for more technology tips.