Checklist for Painters in Brisbane


Getting your house painted is one of the simplest ways to make your house look as good as new again. It is needless to say that the walls of your house tend to weaken with time. If you paint them periodically, it helps them renew their strength and remain strong and sturdy for several more years to come. Most of you are busy with your daily lifestyle. As a result of this, you have to look for professional painters for the painting job. However, there are quite a few of you who believe in DIY method when it comes to house painting chores.

Checklist for DIY Painters

If you trust yourself in painting your home and have often painted your walls on your own in the past, you will know that it is not a simple process. Irrespective of what you are planning to paint, there are several steps that can make the job much simpler for you. Here are some simple steps for you that can make the job of painting easy for you.

  1. First Step: Painting requires proper planning and the right measurements says Emil’s Painting. You need to complete these tasks before you actually start the painting work. These include deciding upon the right colors, determine the amount of paint needed with the help of a paint calculator, and preparing a supply list. This list will include stir sticks, paint, primer, paint rollers, painters tape, rags, small paint brushes, paint trays, drop cloths, sandpaper, painters putty, and putty knife.
  2. Second Step: Once you have noted down the names of the items that you will require in your painting project, the next step involves shopping for all of these items. Do make sure to discuss about your project with the paint store representative so that he can point out anything that you may be missing out in the list.
  3. Third Step: Done with the shopping? The next step involves you to start with all the prep work. This includes taping, spackling, sanding, and moving all the necessary furniture. If you are about to paint on an existing bright color, then make sure to apply a first coat of primer first. At the same time, if you have applied painters putty, you need to sand down the surface and also get rid of any possible dust with a piece of cloth.
  4. Fourth Step: This step involves you to apply the first coat of paint on all the surfaces. Depending upon the painting project, you may have to apply some additional coats of paint. If you are painting a piece of furniture or a décor, you can apply the second coat of paint once the first coat has dried. On the other hand, if you are painting walls, then you will have to give a gap of around 12 hours in between the two coats of paint.
  5. Fifth Step: Apply the second or the third coat of paint, which depends upon the project. You may also complete any touch-ups or any detail work in this step.